π» Tick GMRS under Modes to include GMRS repeaters. They go into CHIRP exports for GMRS radios; Icom exports stay HAM-only, since HAM radios aren't certified to transmit on GMRS.
Enter where you're starting and where you're going. You'll get every repeater along the way, in the order you'll reach them, ready to load into your radio. Leave To empty to find repeaters around one place.
| Mile | Call | Name | Output | Offset | Tone | Mode | Networks | Activity | Location | Off route |
|---|---|---|---|---|---|---|---|---|---|---|
| 0 | WRKU609 | Galax WRKU609 |
462.7000 | +5 | TONE 118.8 | GMRS RP21 open | β | Galax, VA | 5.5 mi | |
| 0 | WRFW739 | Pulaski Peaks WRFW739 |
462.5500 | +5 | none | GMRS RP15 closed | β | Pulaski, VA | 21.4 mi | |
| 0 | WRVF525 | Radford WRVF525 |
462.7250 | +5 | TONE 179.9 | GMRS RP22 closed | β | Radford, VA | 25.0 mi | |
| 0 | WSCP210 | Pearisburg Disma WSCP210 |
462.7000 | +5 | TONE 100.0 | GMRS RP21 open | β | Pearisburg, VA | 36.2 mi | |
| 0 | WROC846 | Christiansburg WROC846 |
462.6000 | +5 | TONE 123.0 | GMRS RP17 open | β | Christiansburg, VA | 36.7 mi | |
| 0 | WRVD609 | Narrows WRVD609 |
462.6000 | +5 | TONE 141.3 | GMRS RP17 open | β | Narrows, VA | 40.2 mi | |
| 0 | WRQC755 | Bluefield ER Mtn WRQC755 |
462.7250 | +5 | TONE 141.3 | GMRS RP22 open | β | Bluefield, VA | 41.5 mi | |
| 0 | WRQC755 | Bluefield ER Mtn WRQC755 |
462.7250 | +5 | TONE 141.3 | GMRS RP22 open | β | Bluefield, VA | 41.5 mi | |
| 0 | WRPN236 | Wilkesboro Littl WRPN236 |
462.6750 | +5 | TONE 123.0 | GMRS RP20 open | β | Wilkesboro, NC | 42.4 mi | |
| 0 | WROV418 | Pearisburg Mtlak WROV418 |
462.6750 | +5 | DCS 073 | GMRS RP20 open | β | Pearisburg, VA | 46.3 mi | |
| 0 | WRWK421 | Princeton WRWK421 |
462.6000 | +5 | TONE 151.4 | GMRS RP17 open | β | Princeton, WV | 47.9 mi |
Repeater data (updated weekly, 33392 repeaters, last refresh 2026-10-11): HearHam.com Β· BrandMeister Β· RadioID.net Β· Yaesu WIRES-X. Routing Β© OSRM / OpenStreetMap contributors. Locations can be approximate; always verify before you rely on a repeater.